Select Page

Available Options:

Description

Rublev Lead Oil Ground is a blend of white pigments and linseed oil for a semi-absorbent ground ideal for oil painting. It dries within two days to one week, depending upon local conditions, such as humidity, light and temperature.

Rublev Lead Oil Ground contains lead white, titanium white and ground calcite (chalk) in just the right proportions to make a paint film that remains flexible and tough with some absorbency. We carefully chose a blend of alkaline-refined and bodied linseed oil so there is some penetration into the support to assure good adhesion and yet maintain sufficient holdout to establish a good foundation for paint layers. This blend of linseed oil also provides leveling, so brush and knife marks are minimized. Rublev  Lead Oil Ground has a high concentration of pigments so usually only two coats are necessary, but more coats create a smoother surface. Apply directly onto panels or on canvas sized with acrylic dispersions, polyvinyl acetate (PVA) or animal collagen glue. Rublev Lead Oil Ground is an excellent foundation for oil and alkyd paints.

The important characteristics that grounds should have are (1) adhesion, 2) flexibility, 3) penetration control, 4) a type of surface to which upper layers can adhere well, 5) blister and crack resistance, and 6) good application properties. Careful selection of ingredients in an oil ground is essential to impart these qualities to the ground. Ground natural calcite (calcium carbonate or GCC) in combination with lead white (basic lead carbonate) and a maximum chalk resistant grade of rutile titanium dioxide have proven to be an excellent choice of pigments in such oil grounds.

Rublev make Lead Oil Ground using all three white pigments; calcite (ground calcium carbonate, such as chalk or whiting), lead white (basic lead carbonate) and titanium white (titanium dioxide) in just the right proportions to make a film that remains flexible, tough and has some degree of absorbency.

The dry ground calcite we use in Rublev  Lead Oil Ground has a closely controlled particle size distribution. This grade of calcite is designed to provide the lowest possible oil absorption. It offers the desired penetration control with maximum chalk resistance. Calcite aids in forming the type of surface on grounds to which upper layers will adhere easily.

Lead white, and to a lesser degree, ground calcite, have low water absorption properties and hence develop better blister and crack resistance. Furthermore, lead white contributes to more film flexibility.

The presence of titanium white increases the opacity of this ground and provides a brilliant white surface. We have selected a grade of titanium white that exhibits good hiding and excellent dispersion properties as well as excellent chalking resistance.

Many manufacturers use zinc white (zinc oxide) to get a brighter white in their white grounds and paint. Zinc oxide is not recommended in oil grounds, since it tends to cause blistering and cracking in oil paint and grounds—we have not used any zinc in this product.

After many trials, we have carefully chosen a specific blend of refined linseed oil with heat-bodied linseed oil such that there is a limited penetration of the oil into the canvas or panel to assure good adhesion to this substrate and yet maintain sufficient holdout to establish a good foundation for the upper layers. This blend of linseed oil also provides the best possible leveling properties, so brush and knife marks are minimized.

As part of the vehicle, Rublev  Lead Oil Ground contains mineral spirits to provide the right fluid consistency and to hasten drying.

A blend of cobalt, zirconium and calcium driers have been added in precise amounts to ensure rapid drying of the primer once it is applied.

Rublev Lead Oil Ground contains an anti-skinning agent to prevent skinning and drying in the can during storage. If kept tightly closed the contents can be expected to last indefinitely, but we recommend purchasing only an amount that can be used within one year.

STIR WELL BEFORE USING. Using a bristle brush, brush the first coat of Rublev  Lead Oil Ground evenly across the canvas or panel. Remove any excess and smooth the surface with a brush or palette knife. Let it dry completely—hard dry. Apply at least one more coat by repeating the process. Allow the canvas or panel to dry thoroughly before painting.

If necessary, Rublev  Lead Oil Ground can be thinned with mineral spirits, odorless mineral spirits (OMS) or turpentine. For best results, do not over dilute.

WARNING! CONTAINS LEAD AND PETROLEUM DISTILLATES. HARMFUL IF SWALLOWED. Avoid ingestion and skin contact. Wear protective clothing and gloves to prevent contact with skin. Avoid inhaling fumes of mineral spirits. Use with adequate ventilation. Never use near children or pets. Conforms to ASTM D 4236.

 

Additional information

Size

, ,

Missing REVIEWS.io API Credentials